Electrospun polydioxanone/fucoidan blend nanofibers loaded with anti-cancer precipitate from Jaspis diastra and paclitaxel: Physico-chemical characterization and in-vitro screening.

Nanofibers for drug delivery systems have gained much attention during the past years. This paper describes for the first time the loading of a bioactive precipitate (JAD) from the marine sponge Jaspis diastra in PDX and fucoidan-PDX. JAD was characterized by LC-MS/MS and the major component was jaspamide (1) with a purity of 62.66 %. The cytotoxicity of JAD was compared with paclitaxel (PTX). JAD and PTX displayed IC50 values of 1.10 ± 0.7 µg/mL and 0.21 ± 0.12 µg/mL on skin fibroblasts L929 cells whilst their IC50 values on uveal MP41 cancer cells, were 2.10 ± 0.55 µg/mL and 1.38 ± 0.68 µg/mL, respectively. JAD was found to be less cytotoxic to healthy fibroblasts compared to PTX. JAD and PTX loaded scaffolds showed sustained release over 96 h in physiological medium which is likely to reduce the secondary cytotoxic effect induced by JAD and PTX alone. The physico-chemical properties of the loaded and unloaded scaffolds together with their degradation and action on tumor microenvironment by using L929 and MP41 cells were investigated. JAD and PTX at a concentration of 0.5 % (drug/polymer, w/w) in the electrospun mats prevented growth and proliferation of L929 and MP41 cells. Co-culture of L929 and MP41 showed that the JAD and PTX loaded mats inhibited the growth of both cells and caused cell death.

Nanomedicine-based strategies to improve treatment of cutaneous leishmaniasis.

Nanomedicine strategies were first adapted and successfully translated to clinical application for diseases, such as cancer and diabetes. These strategies would no doubt benefit unmet diseases needs as in the case of leishmaniasis. The latter causes skin sores in the cutaneous form and affects internal organs in the visceral form. Treatment of cutaneous leishmaniasis (CL) aims at accelerating wound healing, reducing scarring and cosmetic morbidity, preventing parasite transmission and relapse. Unfortunately, available treatments show only suboptimal effectiveness and none of them were designed specifically for this disease condition. Tissue regeneration using nano-based devices coupled with drug delivery are currently being used in clinic to address diabetic wounds. Thus, in this review, we analyse the current treatment options and attempt to critically analyse the use of nanomedicine-based strategies to address CL wounds in view of achieving scarless wound healing, targeting secondary bacterial infection and lowering drug toxicity.

Polysucrose hydrogel and nanofiber scaffolds for skin tissue regeneration: Architecture and cell response.

Scaffolds capable of mediating overlapping multi-cellular activities to support the different phases of wound healing while preventing scarring are essential for tissue regeneration. The potential of polysucrose as hydrogels and electrospun mats for wound healing was evaluated in vitro by seeding fibroblasts, endothelial cells and macrophages either singly or in combination. It was found that the scaffold architecture impacted cell behaviour. Electrospun mats promoted fibroblasts flattened morphology while polysucrose methacrylate (PSucMA) hydrogels promoted fibroblast spheroids formation, accentuated in the presence of endothelial cells. Hydrogels exhibited lower inflammatory response than mats and curcumin loaded scaffolds reduced TNF-α production. In vivo biocompatibility of the hydrogels tested on Wistar rats was superior to electrospun mats. In vivo wound healing studies indicated that PSucMA hydrogels integrated the surrounding tissue with better cellular infiltration and proliferation throughout the entire wound region. PSucMA hydrogels led to scarless wound closure comparable with commercially available gels.

Tunable biomaterials for myocardial tissue regeneration: promising new strategies for advanced biointerface control and improved therapeutic outcomes.

Following myocardial infarction (MI) and the natural healing process, the cardiac mechanostructure changes significantly leading to reduced contractile ability and resulting in additional pressure on the heart muscle thereby increasing the risk of heart failure (HF). The application of cardiac scaffolds in the form of epicardial patches or injectable hydrogels at the infarcted region of the myocardium helps to mechanically reinforce the ventricular walls and allows control over the various stages of the healing process, reducing pathological remodeling and fibrosis and eventually restoring cardiac function. Recent progress in the field of biomaterials engineering allows tuning of cardiac scaffold properties for more effective tissue-biomaterial interaction leading to improved therapeutic outcomes. Nanoscaffold characteristics required for myocardial tissue engineering (TE) including mechanical property, pore size/porosity, immunomodulation, bioactivity, electroconductivity, injectability (for hydrogels) and thickness (for cardiac patches) are herewith reviewed. Strategies for controlling each of these properties via blending, scaffold fabrication, degree of crosslinking, and incorporation of bioactive molecules, amongst others are also discussed. The mechanism of myocardial restoration via enhanced angiogenesis, stem cell homing and mechanical support is further detailed. Finally, key novel innovative strategies with high promise for clinical translation are presented; in particular, the use of extracellular vesicle-loaded scaffolds, integration of electronics within scaffolds for real time monitoring of the engineered tissue performance as well as the possibility of refilling scaffolds with drugs/cells/proteins via a subcutaneous port are highlighted.

Implications of WHO COVID-19 interim guideline 2020.5 on the comprehensive care for infected persons in Africa Before, during and after clinical management of cases.

The novel coronavirus disease 2019 (COVID-19) is one of the biggest public health crises globally. Although Africa did not display the worst-case scenario compared to other continents, fears were still at its peak since Africa was already suffering from a heavy load of other life-threatening infectious diseases such as HIV/AIDS and malaria. Other factors that were anticipated to complicate Africa's outcomes include the lack of resources for diagnosis and contact tracing along with the low capacity of specialized management facilities per capita. The current review aims at assessing and generating discussions on the realities, and pros and cons of the WHO COVID-19 interim guidance 2020.5 considering the known peculiarities of the African continent. A comprehensive evaluation was done for COVID-19-related data published across PubMed and Google Scholar (date of the last search: August 17, 2020) with emphasis on clinical management and psychosocial aspects. Predefined filters were then applied in data screening as detailed in the methods. Specifically, we interrogated the WHO 2020.5 guideline viz-a-viz health priority and health financing in Africa, COVID-19 case contact tracing and risk assessment, clinical management of COVID-19 cases as well as strategies for tackling stigmatization and psychosocial challenges encountered by COVID-19 survivors. The outcomes of this work provide links between these vital sub-themes which may impact the containment and management of COVID-19 cases in Africa in the long-term. The chief recommendation of the current study is the necessity of prudent filtration of the global findings along with regional modelling of the global care guidelines for acting properly in response to this health threat on the regional level without exposing our populations to further unnecessary adversities.

Assessing the mechanisms of action of natural molecules/extracts for phase-directed wound healing in hydrogel scaffolds.

Hydrogels are proving to be very versatile as wound healing devices. In addition to their capabilities of providing a moist cellular environment and adaptive mechanical properties mimicking the extracellular matrix, they allow the incorporation of small molecules, which have potential impacts on cellular behaviour, in their nanostructures. This strategy can allow for specific targeting of the different stages of wound healing namely hemostasis, inflammation, and proliferative and remodelling phases. The latter include interlinked processes such as angiogenesis, collagen synthesis, growth factor release, collagen maturation and re-epithelialization. In this review, we attempt to match the mechanisms of action of natural molecules/extracts to the different stages of wound healing so that they can be used in a novel approach of multiphase-directed tissue regeneration using loaded hydrogel scaffolds.

Correlating WHO COVID-19 interim guideline 2020.5 and testing capacity, accuracy, and logistical challenges in Africa.

Coronavirus disease 2019 (COVID-19), a severe acute respiratory syndrome caused by SARS-CoV-2 was declared a global pandemic by the World Health Organization (WHO) in March 2020. As of 21st April 2021, the disease had affected more than 143 million people with more than 3 million deaths worldwide. Urgent effective strategies are required to control the scourge of the pandemic. Rapid sample collection and effective testing of appropriate specimens from patients meeting the suspect case definition for COVID-19 is a priority for clinical management and outbreak control. The WHO recommends that suspected cases be screened for SARS-CoV-2 virus with nucleic acid amplification tests such as real-time Reverse Transcription-Polymerase Chain Reaction (rRT-PCR). Other COVID-19 screening techniques such as serological and antigen tests have been developed and are currently being used for testing at ports of entry and for general surveillance of population exposure in some countries. However, there are limited testing options, equipment, and trained personnel in many African countries. Previously, positive patients have been screened more than twice to determine viral clearance prior to discharge after treatment. In a new policy directive, the WHO now recommends direct discharge after treatment of all positive cases without repeated testing. In this review, we discuss COVID-19 testing capacity, various diagnostic methods, test accuracy, as well as logistical challenges in Africa with respect to the WHO early discharge policy.

SARS-CoV-2 Viral Shedding and Transmission Dynamics: Implications of WHO COVID-19 Discharge Guidelines.

The evolving nature of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has necessitated periodic revisions of COVID-19 patient treatment and discharge guidelines. Since the identification of the first COVID-19 cases in November 2019, the World Health Organization (WHO) has played a crucial role in tackling the country-level pandemic preparedness and patient management protocols. Among others, the WHO provided a guideline on the clinical management of COVID-19 patients according to which patients can be released from isolation centers on the 10th day following clinical symptom manifestation, with a minimum of 72 additional hours following the resolution of symptoms. However, emerging direct evidence indicating the possibility of viral shedding 14 days after the onset of symptoms called for evaluation of the current WHO discharge recommendations. In this review article, we carried out comprehensive literature analysis of viral shedding with specific focus on the duration of viral shedding and infectivity in asymptomatic and symptomatic (mild, moderate, and severe forms) COVID-19 patients. Our literature search indicates that even though, there are specific instances where the current protocols may not be applicable ( such as in immune-compromised patients there is no strong evidence to contradict the current WHO discharge criteria.

Piezoelectric core-shell PHBV/PDX blend scaffolds for reduced superficial wound contraction and scarless tissue regeneration.

The use of non-invasive scaffold materials which can mimic the innate piezoelectric properties of biological tissues is a promising strategy to promote native tissue regeneration. Piezoelectric and cell instructive electrospun core-shell PDX/PHBV mats have been engineered to promote native tissue and skin regeneration. In depth physicochemical characterisation, in vitro and in vivo studies of a rat model showed that the 20/80 PDX/PHBV composition possessed the right balance of physicochemical and piezoelectric properties leading to enhanced fibroblast stimulation, proliferation and migration, reduced fibroblast-mediated contraction and macrophage-induced inflammation, improved keratinocyte proliferation, proper balance between endothelial cell phenotypes, decreased in vivo fibrosis and accelerated in vivo scarless wound regeneration. Overall, this study highlights the importance of exploiting cell-material interactions to match tissue biological needs to sustain the wound healing cascade.

Green seaweeds ulvan-cellulose scaffolds enhance in vitro cell growth and in vivo angiogenesis for skin tissue engineering.

Cellulose has been extracted from a wide range of land resources, whereas it has been scarcely exploited from marine resources. Cellulose from green seaweeds can be extracted together with smaller molecules called ulvans. We have successfully extracted and characterized cellulose from Ulva sp. Solid state 13C NMR indicated the presence of ulvans in the cellulose extracts. The extracted cellulose was blended with polylactide and polydioxanone and electrospun into nanofibrous mats with a range of physico-chemical properties. These cellulose-based scaffolds were assessed in vitro using fibroblast cells and showed accelerated cell growth. In vivo biocompatibility studies using a Wistar rat model indicated the absence of foreign body response and enhanced angiogenesis.

Repurposing nano-enabled polymeric scaffolds for tumor-wound management and 3D tumor engineering.

The main challenges of cancer drugs are toxicity, effect on wound healing/patient outcome and in vivo instability. Polymeric scaffolds have been used separately for tissue regeneration in wound healing and as anticancer drug releasing devices. Bringing these two together in bifunctional scaffolds can provide a tool for postoperative local tumor management by promoting healthy tissue regrowth and to deliver anticancer drugs. Another addition to the versatility of polymeric scaffold is its recently discovered ability to act as 3D cell culture models for in vitro isolation and amplification of cancer cells for personalized drug screening and to recapitulate the tumor microenvironment. This review focuses on the repurposing of 3D polymeric scaffolds for local tumor-wound management and development of in vitro cell culture models.

Correlating in vitro performance with physico-chemical characteristics of nanofibrous scaffolds for skin tissue engineering using supervised machine learning algorithms.

The engineering of polymeric scaffolds for tissue regeneration has known a phenomenal growth during the past decades as materials scientists seek to understand cell biology and cell-material behaviour. Statistical methods are being applied to physico-chemical properties of polymeric scaffolds for tissue engineering (TE) to guide through the complexity of experimental conditions. We have attempted using experimental in vitro data and physico-chemical data of electrospun polymeric scaffolds, tested for skin TE, to model scaffold performance using machine learning (ML) approach. Fibre diameter, pore diameter, water contact angle and Young's modulus were used to find a correlation with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay of L929 fibroblasts cells on the scaffolds after 7 days. Six supervised learning algorithms were trained on the data using Seaborn/Scikit-learn Python libraries. After hyperparameter tuning, random forest regression yielded the highest accuracy of 62.74%. The predictive model was also correlated with in vivo data. This is a first preliminary study on ML methods for the prediction of cell-material interactions on nanofibrous scaffolds.

Improved Multicellular Response, Biomimetic Mineralization, Angiogenesis, and Reduced Foreign Body Response of Modified Polydioxanone Scaffolds for Skeletal Tissue Regeneration.

The potential of electrospun polydioxanone (PDX) mats as scaffolds for skeletal tissue regeneration was significantly enhanced through improvement of the cell-mediated biomimetic mineralization and multicellular response. This was achieved by blending PDX ( i) with poly(hydroxybutyrate- co-valerate) (PHBV) in the presence of hydroxyapatite (HA) and ( ii) with aloe vera (AV) extract containing a mixture of acemannan/glucomannan. In an exhaustive study, the behavior of the most relevant cell lines involved in the skeletal tissue healing cascade, i.e. fibroblasts, macrophages, endothelial cells and preosteoblasts, on the scaffolds was investigated. The scaffolds were shown to be nontoxic, to exhibit insignificant inflammatory responses in macrophages, and to be degradable by macrophage-secreted enzymes. As a result of different phase separation in PDX/PHBV/HA and PDX/AV blend mats, cells interacted differentially. Presumably due to varying tension states of cell-matrix interactions, thinner microtubules and significantly more cell adhesion sites and filopodia were formed on PDX/AV compared to PDX/PHBV/HA. While PDX/PHBV/HA supported micrometer-sized spherical particles, nanosized rod-like HA was observed to nucleate and grow on PDX/AV fibers, allowing the mineralized PDX/AV scaffold to retain its porosity over a longer time for cellular infiltration. Finally, PDX/AV exhibited better in vivo biocompatibility compared to PDX/PHBV/HA, as indicated by the reduced fibrous capsule thickness and enhanced blood vessel formation. Overall, PDX/AV blend mats showed a significantly enhanced potential for skeletal tissue regeneration compared to the already promising PDX/PHBV/HA blends.

Mimicking growth factors: role of small molecule scaffold additives in promoting tissue regeneration and repair.

The primary aim of tissue engineering scaffolds is to mimic the in vivo environment and promote tissue growth. In this quest, a number of strategies have been developed such as enhancing cell-material interactions through modulation of scaffold physico-chemical parameters. However, more is required for scaffolds to relate to the cell natural environment. Growth factors (GFs) secreted by cells and extracellular matrix (ECM) are involved in both normal repair and abnormal remodeling. The direct use of GFs on their own or when incorporated within scaffolds represent a number of challenges such as release rate, stability and shelf-life. Small molecules have been proposed as promising alternatives to GFs as they are able to minimize or overcome many shortcomings of GFs, in particular immune response and instability. Despite the promise of small molecules in various TE applications, their direct use is limited by nonspecific adverse effects on non-target tissues and organs. Hence, they have been incorporated within scaffolds to localize their actions and control their release to target sites. However, scanty rationale is available which links the chemical structure of these molecules with their mode of action. We herewith review various small molecules either when used on their own or when incorporated within polymeric carriers/scaffolds for bone, cartilage, neural, adipose and skin tissue regeneration.

Enhanced Differentiation of Human Preosteoblasts on Electrospun Blend Fiber Mats of Polydioxanone and Anionic Sulfated Polysaccharides.

The viability and differentiation of SaOS-2 preosteoblasts on fiber mats of blends comprising of the biodegradable poly(ester-ether) polydioxanone (PDX) and the sulfate-containing anionic polysaccharides kappa-carrageenan (KCG) and fucoidan (FUC) were investigated for a range of different blend compositions. The detailed analysis of the blend nanofiber properties revealed a different degree of miscibility of PDX and the polysaccharide leading to a different enrichment at the surface of the blend nanofibers, which were observed to be stable in phosphate buffer solution (PBS) for up to 5 weeks. The fibrous mats of PDX/FUC led to the highest osteogenic differentiation with very good cell viability. The electrospun blend fibers also supported human-induced pluripotent stem (iPS) cells and iPS cell-derived embryoid bodies with high cell viability, which underlines the potential of these novel blend fiber systems for optimized performance in bone tissue engineering applications.

Biomineralization potential and cellular response of PHB and PHBV blends with natural anionic polysaccharides.

In this paper, the biomineralization potential and cellular response of novel blend films of the anionic sulfated polysaccharides kappa-carrageenan (KCG) and fucoidan (FUC) derived from seaweeds with semi-crystalline polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHBV), respectively, were analyzed. The incorporation of KCG and FUC into PHB and PHBV, which has been studied here for the first time, led to an overall decrease in crystallinity, enhanced surface hydrophilicity, reduced brittleness and faster degradation of the polymer blend films. All PHB/KCG, PHBV/KCG and PHBV/FUC films exhibited a two-stage mass loss profiles with pH stabilization. PHBV/KCG film showed the highest biomineralization activity due the presence of sulfate groups on the surface of the films. NIH3T3 cells attached and proliferated well on all blend films on account of enhanced surface hydrophilicity and improved flexibility. PHBV/KCG led to a promoted cellular activity compared to PHBV/FUC, presumably due to phase separation and higher amount of biopolymer on the film surface that was a consequence of the immiscibility of the polymers in the blend films.

κ-Carrageenan Enhances the Biomineralization and Osteogenic Differentiation of Electrospun Polyhydroxybutyrate and Polyhydroxybutyrate Valerate Fibers.

Novel electrospun materials for bone tissue engineering were obtained by blending biodegradable polyhydroxybutyrate (PHB) or polyhydroxybutyrate valerate (PHBV) with the anionic sulfated polysaccharide κ-carrageenan (κ-CG) in varying ratios. In both systems, the two components phase separated as shown by FTIR, DSC and TGA. According to the contact angle data, κ-CG was localized preferentially at the fiber surface in PHBV/κ-CG blends in contrast to PHB/κ-CG, where the biopolymer was mostly found within the fiber. In contrast to the neat polyester fibers, the blends led to the formation of much smaller apatite crystals (800 nm vs 7 µm). According to the MTT assay, NIH3T3 cells grew in higher density on the blend mats in comparison to neat polyester mats. The osteogenic differentiation potential of the fibers was determined by SaOS-2 cell culture for 2 weeks. Alizarin red-S staining suggested an improved mineralization on the blend fibers. Thus, PHBV/κ-CG fibers resulted in more pronounced bioactive and osteogenic properties, including fast apatite-forming ability and deposition of nanosized apatite crystals.

Third generation poly(hydroxyacid) composite scaffolds for tissue engineering.

Bone tissue engineering based on scaffolds is quite a complex process as a whole gamut of criteria needs to be satisfied to promote cellular attachment, proliferation and differentiation: biocompatibility, right surface properties, adequate mechanical performance, controlled bioresorbability, osteoconductivity, angiogenic cues, and vascularization. Third generation scaffolds are more of composite types to maximize biological-mechanical-chemical properties. In the present review, our focus is on the performance of micro-organism-derived polyhydroxyalkanoates (PHAs)-polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHBV)-composite scaffolds with ceramics and natural polymers for tissue engineering applications with emphasis on bone tissue. We particularly emphasize on how material properties of the composites affect scaffold performance. PHA-based composites have demonstrated their biocompatibility with a range of tissues and their capacity to induce osteogenesis due to their piezoelectric properties. Electrospun PHB/PHBV fiber mesh in combination with human adipose tissue-derived stem cells (hASCs) were shown to improve vascularization in engineered bone tissues. For nerve and skin tissue engineering applications, natural polymers such as collagen and chitosan remain the gold standard but there is scope for development of scaffolds combining PHAs with other natural polymers which can address some of the limitations such as brittleness, lack of bioactivity and slow degradation rate presented by the latter. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1667-1684, 2017.

Modulating Immunological Responses of Electrospun Fibers for Tissue Engineering.

The promise of tissue engineering is to improve or restore functions of impaired tissues or organs. However, one of the biggest challenges to its translation to clinical applications is the lack of tissue integration and functionality. The plethora of cellular and molecular events occurring following scaffold implantation is a major bottleneck. Recent studies confirmed that inflammation is a crucial component influencing tissue regeneration. Immuno-modulation or immune-engineering has been proposed as a potential solution to overcome this key challenge in regenerative medicine. In this review, strategies to modify scaffold physicochemical properties through the use of the electrospinning technique to modulate host response and improve scaffold integration will be discussed. Electrospinning, being highly versatile allows the fabrication of ECM-mimicking scaffolds and also offers the possibility to control scaffold properties for instance, tailoring of fiber properties, chemical conjugation or physical adsorption of non-immunogenic materials on the scaffold surface, encapsulating cells or anti-inflammatory molecules within the scaffold. Such electrospun scaffold-based immune-engineering strategies can significantly improve the resulting outcomes of tissue engineering scaffolds.

Polydioxanone-based bio-materials for tissue engineering and drug/gene delivery applications.

Since the commercialization of polydioxanone (PDX) as a biodegradable monofilament suture by Ethicon in 1981, the polymer has received only limited interest until recently. The limitations of polylactide-co-glycolide (PLGA) coupled with the growing need for materials with enhanced features and the advent of new fabrication techniques such as electrospinning have revived interest for PDX in medical devices, tissue engineering and drug delivery applications. Electrospun PDX mats show comparable mechanical properties as the major structural components of native vascular extracellular matrix (ECM) i.e. collagen and elastin. In addition, PDX's unique shape memory property provides rebound and kink resistance when fabricated into vascular conduits. The synthesis of methyl dioxanone (MeDX) monomer and copolymers of dioxanone (DX) and MeDX have opened up new perspectives for poly(ester-ether)s, enabling the design of the next generation of tissue engineering scaffolds for application in regenerating such tissues as arteries, peripheral nerve and bone. Tailoring of polymer properties and their formulation as nanoparticles, nanomicelles or nanofibers have brought along important developments in the area of controlled drug or gene delivery. This paper reviews the synthesis of PDX and its copolymers and provides for the first time an exhaustive account of its applications in the (bio)medical field with focus on tissue engineering and drug/gene delivery.